Skip to main content

Featured Post

Induction Motor Interview Questions with Answers | Part-1

4 comments

Selection and Specifications Of Transmission Line

Selection and Specifications Of Transmission Line

Transmission line design
Selection and Specifications Of Transmission Line

 Following factors are affecting the selection and specifications of transmission lines:

  • ✓ Size of transmission conductors
  • ✓ Spacing and distance between conductors
  • ✓ Insulator types
  • ✓ Insulation co-ordination
  • ✓ Voltage regulation
  • ✓ Power losses
  • ✓ Voltage level of transmission line
  • ✓ Tower designs
  • ✓ Clearance levels
  • ✓ Noise emission
  • ✓ Corona loss
  • ✓ Weather conditions e.g. temperature, wind etc.
  • ✓ Mechanical strength of selected conductors
  • ✓ Air pollution

 In high temperature regions, conductor material chosen for transmission line should have higher temperature coefficient of resistance. Wind load affects the sag clearance putting more pressure on transmission lines.

 Mechanical strength of selected conductors should be higher to avoid breaking of conductor due to wind pressure or increase in temperature etc.

 Moisturised air or polluted air causes chemical effects on transmission lines leading to damage. Towers are giving mechanical support to the transmission lines.

 Useful Electrical Articles Must Read:

 Non proper design of tower leads to failure or damage to the transmission lines. Voltage level decides the size of transmission line conductors used for transfer of power.

 Insulators are needed to be proper size and rating. If it is not there it leads to flashover  of and braking transmission line conductors.

 Proper spacing and distance between conductors should be maintains other it leads to short circuit during operations or working.

 Basic Insulation Level (BIL) should be maintained. Improper insulation co-ordination leads to failure of transmission lines in case of faults.

 Larger power losses affect the efficiency and performance of transmission lines. So transmission line conductors should have low resistance.

 More Related Articles:

Labels:

Comments

  1. Emelia SwanNovember 2, 2020 at 3:02 PM

    This comment has been removed by the author.

    ReplyDelete
  2. Emelia SwanNovember 2, 2020 at 3:03 PM

    Why we need Banking System? and Talibilm provide all news related to study and you can also get info about latest results.

    ReplyDelete
  3. ZabDecember 27, 2021 at 7:43 AM

    power cables are really needed for this project. Transmission lines should not be low quality

    ReplyDelete

Post a Comment

Popular posts from this blog

Variable Inductance Transducer | Classification Of Variable Inductance Transducer

Variable Inductance Transducer | Classification Of Variable Inductance Transducer Variable Inductance Transducer | Classification Of Variable Inductance Transducer These are based on a change in the magnetic characteristic of an electrical circuit in response to a measurand which may be displacement, velocity, acceleration etc. Variable inductive transducer may be classified as follows: 1.Self-generating type In this type voltage is generated because of the relative motion between a conductor and a magnetic field. These may be further classified as follows: (A)Electromagnetic type (B)Electrodynamic type (C)Eddy current type 2.Passive type In this type the motion of an object results in change in the inductance of the coils of the transducer. These may be further classified as follows: (A)Variable reluctance (B)Mutual inductance (C)Differential transfer type 1.Self-generating Type (A)Eleotromagnetic t...
1 comment
Read more

MarX Generator

MarX Generator | High voltage pulse generator Marx Generator - High voltage pulse generator What is MarX Generator? Marx Generator is Electrical circuit which used for generate high voltage pulse. Marx generator is same as like voltage multiplier circuit. First watch the video of marx generator.. Marx Generator produce high voltage Spark as like lightning. Now learn how to make marx generator... Circuit Diagram of marx generator circuit is shown in below image. Circuit Diagram of marx Generator Here, First capacitor are connected in parallel. When DC supply is applied, capacitors charge through resistor by voltage Vc. Spark gaps use as a switch, Here first spark gap voltage is greater than the voltage Vc. So spark gaps are behave as a open circuit during capacitor charge. Now to generate high voltage pulse, The first spark gap need to be breakdown. So, By breakdown spark gap will be short circuit an...
4 comments
Read more

Induction Motor Interview Questions with Answers | Part-1

Induction Motor Interview Questions with Answers | Part-1 Induction Motor Interview Questions with Answers | Part-1 Q.1 The frame of an induction motor is made of (A) aluminium (B) silicon steel (C) closed grained cast iron (D) stainless steel (E) bronze Answer:  (C) closed grained cast iron Q.2 The stator frame is an induction motor is used to (A) hold the armature stampings in position (B) ventilate the armature (C) protect the whole machine (D) provide return path for flux Answer:  (A) hold the armature stampings in position Q.3 The stator core of a 3 phase induction motor is laminate in order to reduce the (A) eddy current loss (B) hysteresis loss (C) both hysteresis and eddy current loss (D) weight of the stator (E) windage and friction losses Answer: (A) eddy current loss Q.4 An induction motor works with (A) dc only (B) ac only (C) ac and dc both (D) none of these Answer:  (B) ac only Q.5 Which of the following statement associated with polyphase induction motor is...
4 comments
Read more